tako, pred tremi dnevi odstranil k*r?eve Champion brisalce za par evrov, in namestil BOSCH AEROTWIN Original... zdaj se spet skoz ?ajbo vidi, tudi ?e de?uje...
zakaj se diski zadaj ne svetijo kot spredaj, oz. kot pri ostalih avtomobilih? ?E jih pogleda? od blizu so rjavkasto-modrikasti. ?eljusti so teko?e in ni? rjave.Avto sem kupil pri 120k km, zdaj jih ima 155k km, zato ne vem katere plo??ice mam gor, diski sklepam da so original. Ali so plo??ice pretrde? Kaj svetujete?
?e so rjavkasto modrikasti po povr?ini, potem se je ali nekdo peljal z pritegnjeno ro?no, ali ti bat ?eljusti ne gre nazaj...
stro?ek zadnjih diskov, plo??ic in tesnil za bate na zavornih ?eljustih je cca 170 EUR...
?e so zadnje plo??ice pri kraju, menjaj, pa mir...
vrag je vzel ?alo, plo??ice sem menjal, in za?elo je ?e bolj trest, diagnoza torej, da pri slabih 130k km rabim nove diske, ?eprav stari ?e niti po?teno obrabljeni niso...
kar se webasta ti?e, se je meni to dogajalo na 6ki pred leti, ko je bilo ravno dovolj hladno, da se je vklapljal, sem se pa vozil na kratke razdalje...
potem sem 2 ali 3 krat pustil avto pol ure laufat na mestu, ko je bilo konkretno hladno, in sem dal gretje na full, pa je od takrat mir...razen, ?e se 5-6x zaporedoma peljem sem ter tja po dvori??u... ko se webasto vklopi in takoj izklopi... zgleda, ostanejo neki ostanki, ali karkoli...
kar se pa kodne kartice ti?e, pa je mogo?e smiselno probat ponovno "prijavit" kartico na vozilo...
Open the driver's-side door of your Mazda and leave it open.
2
Press the power door lock on the driver's-side door to lock and unlock it one time each.
3
Insert the smart card key (available at your Mazda dealership or online) into the ignition.
4
Turn the key to the "On" position and then return to the "Off" position. Perform this task three times within 10 seconds. After you have completed the task leave the key in the ignition.
5
Open and close the driver's door three times and leave it open after the third time. The car's computer will respond to this by locking and unlocking the car's doors one time.
6
Press any one of the buttons on your smart card key. The car will respond by locking and unlocking the doors again.
7
Remove the key from the ignition, and the computer will respond one last time with a series of locks and unlocks. Remove the key from the ignition, and your smart card will be programmed.
Step 2: Lock and unlock the driver’s door using the power door lock switch on the door.
Step 3: Insert key into the ignition.
Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.
Step 5: Open and close the driver’s door 3 times. (Door should be left open after this step).
Step 6: ECU should respond by locking and unlocking the doors.
Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors.
Step 8: Press any button on remote #2 (etc.) twice. Each time the ECU will respond by locking & unlocking the doors.
Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!
Spletna stran uporablja piškotke z namenom zagotavljanja funkcionalnosti in boljše uporabniške izkušnje spletnega mesta. Z uporabo spletnega mesta soglašate z uporabo piškotkov.
kak?no stikalo?Mislim,da ima bimetal in se sam izklaplja in ne more? ?telat temperature sede?a.
Napisano
klasi?en "BOBI" style
z ultra ?ankom na zadku
p/s: kaj noben ve? ne ve telefona poprek dr?at?
LP KAALman
Povezava za deljenje
Deli na druge strani