mazda 2 radio

[petercr4]

Zanimam se za rabljeno Mazdo 2. Avtoradio je serijsko integriran in kolikor sem do sedaj prebral, ga je prakti?no nemogo?e zamenjati. Baje lahko priklopi? samo izmenjevalec CDjev od Mazde (ki pa je drag). Je ?e kak?na druga mo?nost za predvajanje mp3 ali vsaj ve? CDjev?

[mi_c_ho]

Kolega je pri prvi mazdi 2 menjal akumulator in sedaj mu radio zahteva kodo, katere pa nima. Mogo?e kdo ve kak?na je koda in kako se odklene radio. Hvala!

A tole deluje? Je kdo ?e probal?

 

If you don"t know the Owner"s Code, the instructions are similar.

The first goal is to get the display to flash"ERR" instead of code. Then you can enter the Dealer Code to reset the radio. Here are the steps:

STEP 1: Turn the ignition to ACC

STEP 2: Briefly and simultaneously press both SEARCH and AUTO-M. This action should change the display from a blinking code to a solid.

STEP 3: Using the radio preset buttons 1, 2, 3, and 4, set any four-digit code in the display. The first position can be set using the 1 button, the second using the 2 button, etc.

STEP 4: Press and hold both SEARCH and AUTO-M. If by some chance you guessed the Owner"s Code, there will be a loud beep and the display will show good before the radio turns off. If this happens, you are done. More likely, the display will briefly show"ERR" and then change back to the flashing code.

STEP 5: Repeat steps 1-4 until you have a flashingERR instead of a flashing code.

STEP 6: Press the following buttons in sequence: SEARCH, AM, AUTO-M, FM 1/2. The display should now show .

STEP 7: Set the code to 4989 using the preset buttons, as before.

Press and hold both SEARCH and AUTO-M until you hear a loud beep and the displayflashes good. The radio will then turn off, and you are ready to start listening again.

[ziga.mazda]

Jaz na mazdi 2 letnik 2008 imam original radio kateri ima za dat noter 6 CD glede mp3 ima vhod AUX med sede?i

[mi_c_ho]

Deluje

 

edino pri koraku 6 je potrebno za ''FM 1/2'' pritisniti SEEK UP...

STEP 6: Press the following buttons in sequence: SEARCH, AM, AUTO-M, FM 1/2. The display should now show .